Electric fence for wild boars complete perimeter 500 m

Complete Fence Installation Guide

First of all, you need to fix the 2 wooden poles of the entrance to the ground, with the relative ISOBAR insulators present in the package (2 per pole, at a height of 25 cm and 50 cm from the ground). 

Then install a metal pole every 5 meters. There are 100 poles in the package.

Connect the first MRS007 fence wire (starting from the gate), to the ISOBAR Insulator , using the 5 mm sheath for fence wire supplied. Then fence the entire perimeter (2 times).

Install the signal boards for electric fences, and the electric fence entrance barrier.

Insert the battery inside the Energizer Lacme 614000 and connect the 2 obligatory pins (positive and negative, with different sizes). Close the energizer (which does not necessarily have to be placed indoors), connect the ground wire to the machine and place the ground poles  (included in the energizer package) in the ground, which must remain moist (water if necessary).

Install the Inter Galva connections to ensure that the current propagates on both rows.

Finally, test the system with the special Lacme voltage tester supplied. To do this, you need to insert the tester probe into the ground and let the wire of the fence touch the metal part located at the top of the tester. The LEDs must all be turned on, otherwise there is a power failure that must be identified and fixed.

For any changes to this package you can contact us via this page.

If you have a question, please use the form at the bottom of the page.

The fence is ready. Good cultivation